1

Tråd: konfigurations guide e398 (dovado 4gr)

Vilka inställningar ska man ha på mtu mru  ska man ha mss clamping ? ja vilka inställningar för bästa resultat vill ngn vänlig själ som håller svaren dela med sig?

2

Sv: konfigurations guide e398 (dovado 4gr)

Prova 1400

Tips ar att kolla wikipedia om vanliga varden.

Vill du ha korrekta varden behovs bla operator och abg typ da det skiljer lite for att kunna get ett svar.

3

Sv: konfigurations guide e398 (dovado 4gr)

Kommer gå upp på våran FAQ lagom snart:


1) Insert the USB modem into your computer and connect to the Internet.
2) Download TCP Optimizer: http://www.speedguide.net/files/TCPOptimizer.exe
3) In the program, go to the “MTU/Latency” tab.
4) Click on the "Largest MTU" button.
5) Once the test is done, it'll say at the bottom "You can set your MTU to...."
6) Back into the DOVADO router, go to the SYSTEM->NETWORK SETTINGS page and deselect "Let router use safe settings" and fill in the MTU and MRU field with the value you got from TCP Optimizer.
7) Make sure to Enable MSS Clamping.
8) Save and Restart with USB modem inserted.

4

Sv: konfigurations guide e398 (dovado 4gr)

Tackar ska se hur det funkar nu:)

5

Sv: konfigurations guide e398 (dovado 4gr)

Should i use drop ping request sam? on dovado 4gr

6

Sv: konfigurations guide e398 (dovado 4gr)

If you like.

7

Sv: konfigurations guide e398 (dovado 4gr)

It will not affect gaming or anything else ? is it for the better

8

Sv: konfigurations guide e398 (dovado 4gr)

It only blocks incoming ping requests to your router from outside.

9

Sv: konfigurations guide e398 (dovado 4gr)

unless something needs ping replys, drop it - or someone could mass ping you and get you to lag in game... Ping of death in another sense.

10

Sv: konfigurations guide e398 (dovado 4gr)

1) Insert the USB modem into your computer and connect to the Internet.
2) Download TCP Optimizer: http://www.speedguide.net/files/TCPOptimizer.exe
3) In the program, go to the “MTU/Latency” tab.
4) Click on the "Largest MTU" button.
5) Once the test is done, it'll say at the bottom "You can set your MTU to...."
6) Back into the DOVADO router, go to the SYSTEM->NETWORK SETTINGS page and deselect "Let router use safe settings" and fill in the MTU and MRU field with the value you got from TCP Optimizer.
7) Make sure to Enable MSS Clamping.
8) Save and Restart with USB modem inserted.


I have done all this and i only use 4 should i use Tx Queue Length to and shall i set mru as the same as the mtu